We have Used / refurbished equipment come up for sale all the time.
Please contact Mill Masters about used tube production equipment. 731-668-5558

SOLD McKenica H.F. Welded Brass Radiator Tube Mill SOLD
• Manufactured in 1989 - Serial No. 1052-1187 -460 volt, 60-cycle, 3 phase – right to left operation
• Current weld-in-round process can be tooled for weld-in-shape based on your needs
• Dual non-driven stock reels with electric braking system:
• Resistance type strip end splicer and tumble-box accumulator is included
• Complete forming section with all stands and lubricant system – no subplates
• Complete weld / quench / scarf section with McKenica style weld squeeze box
• Thermatool 100Kw H.F. vacuum tube welder with dual 450/ 650 kHz frequency.
• Pruftechnik Eddy Check 5 in-line weld examination system with reject gate
• Natural gas-fired solder furnace system
• MHS-7 cutoff including upgraded controller and electronics package.
• Spare parts
• Capable of flat-oval tube sizes from 12mm to 20mm & thicknesses down to 0.127mm

SOLD McKenica H.F. Welded Aluminum Radiator & CAC Mill SOLD
with 12mm to 65mm flat-oval capability
• Original McKenica weld-in-round mill converted for weld in shape & weld in round
• 440 Volt+/- 6%, 3 Phase, 60 Hz – right to left operation
• Fully re-built Thermatool 100Kw x 750kHz V.T. Welder
• Many brand new components and systems including:
• New heavy duty stock reel, dancer, and strip end splicer – all on new bases and base
• New pinch roll unit, free-loop tension management unit, and accumulator on new bases
• New rotary cutoff and base
• New cone and servo drive transmissions
• Forming and sizing subplates are all new including all new rollstands and weld boxes
• New scarf unit and quench tunnel
• New motors and drives with new Allen Bradley PLC and complete new electronics package including new
Touchscreen Operator control HMI
• New dimple and free zone dimpling station for dimpled and 2-chamber radiator tubes up to 62mm in width
with free-ends
• Includes in-line eddy current weld inspection and integrated bad-tube reject gate
• Perfect for a wide range of flat-oval radiator, heater, and CAC tubes up to 65mm

For more information please contact a Mill Masters sales representative.
(731) 668-5558     sales@millmasters.net





© Copyright 1999 - 2011 Mill Masters Inc, All Rights Reserved
Web Site Developed By Wired Web Development

Mill Masters Version 4.0
Home   Company   Contact   Media Page   Chinese Page   Site Map   Elite  Ultra  Spectrum  Premier  Quantum  Cable  Stainless Steel  CuproBraze©
Tube Dimple Station  Tube Handling Equipment   BT3500 Burst Tester  RC340 Rotory Cut Off Weld Boxes   Subplate Systems   Spare Parts   Tooling
Online Support  On Site Support   Mill Troubleshooting   Systems Troubleshooting   Mill Refurbishment   Tooling Refurbishment   Mechanical & Electrical